Product Details
Product Introduction
304L stainless steel is a universal stainless steel material.
304L Stainless steel Brand:
The old standard JB/T 4237-1992 corresponds to 00Cr19Ni10
New STANDARD GB/T 20878-2007 Stainless steel and heat resistant steel grades and chemical composition
And GB 24511 2009 stainless steel plates and belts for pressure equipment
Above corresponds to 022Cr19Ni10, and its carbon content is about 0.03%
Uniform code S30403 differs from S30408 of 304
Product Detail
Grade: 300 Series
Standard: JIS, AISI, ASTM, GB, DIN, EN
Length:Coil
Width:50mm-1800mm
Place of Origin:WUXI China
Brand Name: Tisco Bao Steel
Model Number: 304L
Type:Coil
Application: kitchen, industry
Certification: ISO
Product name:304L Stainless Steel Coil
Surface: 2B/NO.4/HL/NO.1/BA
Thickness: 0.2mm-60mm
Brand: TISCO JISCO LISCO BAOSTEEL
Technique:Cold Rolled Hot Rolled
Edge: Mill Edge Slit Edge
Price Term: CIF CFR FOB EX-WORK
Packing:Standard Sea-worthy Packing
Sample: Available
Delivery time:Negotiable
Chemical component
Name: 304L stainless steel plate, 304L stainless steel plate, 304L stainless steel 8K plate
Brand No. : 00Cr19Ni10 (0Cr18Ni10)
Chemical composition %
P: 0.035 or less
S: 0.03 or less
Cr: 18.0 ~ 20.0
Ni: 8.0 ~ 10.0
Density
Steel Grade ; Density(g/cm3)
304,304L,305,321201,202,301,302 7.93
316,316L,347309S,310S 7.98
405,410,420 7.75
409,430,434 7.7
Executive standards
304L stainless steel is a universal stainless steel material.
304L Stainless steel Brand:
The old standard JB/T 4237-1992 corresponds to 00Cr19Ni10
New STANDARD GB/T 20878-2007 Stainless steel and heat resistant steel grades and chemical composition
And GB 24511 2009 stainless steel plates and belts for pressure equipment
Above corresponds to 022Cr19Ni10, and its carbon content is about 0.03%
Uniform code S30403 differs from S30408 of 304
Mechanical property
Yield strength (N/mm2) ≥205
Tensile strength ≥520
Elongation (%) ≥40
Hardness HB ≤187 HRB≤90 HV ≤200
The density of 7.93 g · cm - 3
Specific heat c (20 ℃) 0.502 j. (g · c) - 1
Thermal conductivity /W(m·℃)-1 (at the following temperature /℃)
20 100 500
12.1 16.3 21.4
Linear expansion coefficient /(10-6/℃) (between the following temperatures /℃)
20 ~ 100 20 ~ 200 20 ~ 300 20 ~ 400
16.0 16.8 17.5 18.1
Resistivity Ω, was, 0.73 m - 1
Melting point 1398 ~ 1420℃
Surface description
A rough, matte surface heated to a specified thickness and then annealed and descaled without the need for a gloss finish
Silver-white cold rolled, heat treatment, pickling, and sometimes a final light roll on the surface of a matte surface processing 2D product used for applications where surface requirements are lax, for general use, for deep drawing
Product specification
The 304L is a variation of 304 stainless steel with a low carbon content and is used where welding is required.The lower carbon content minimizes the carbide precipitation in the heat-affected zone near the weld, which may result in intercrystalline corrosion (welding erosion) of stainless steel in some environments.
Range of application
Household articles (1, 2 type tableware, cabinet, indoor pipeline, water heater, boiler, bathtub);Auto parts (windshield wipers, mufflers, mold products);Medical equipment, building materials, chemistry, Food industry, Agriculture, ship parts.
Our Service
The perennial stock of the company has reached more than 8000 tons to become one of the largest and most complete domestic spot platform.
As a large manufacturer, we can produce products according to the needs of different customers, which can reduce customers' production cost, improve utilization rate, help customers reduce waste and save cost.
http://www.jshgoldencoral.com/